How To Repair Cd Rom And Dvd Not Working (Solved)

Home > Drive Not > Cd Rom And Dvd Not Working

Cd Rom And Dvd Not Working

Contents

Verify that the software has been properly installed and configured. If the CD/DVD drive is listed, make sure AutoPlay is enabled. For internal drives, check computer cooling fans, filters, and ventilation. To access the BIOS, fully shut down the computer, then restart using the following steps: Press and hold the power button for 5 seconds to turn your computer completely off.

Under I need help immediately, select the Software Program Reinstallation option. If a disc is scratched, try to clean or repair the disc. If the computer still cannot burn discs after performing the other steps in this document, test the drive for hardware failure. Drive settings can be added or altered by accessing the BIOS settings during start-up. http://support.hp.com/us-en/document/c03280768

Cd Drive Not Working Windows 10

Click the Advanced button. The disc drive should now be recognized by your recording software. Verify that the drive supports the media that you are trying to read. DVD drives can sometimes be the most susceptible to heat problems. 1) The DVD Drive Has No Power The most common cause of this DVD problem is an issue with the

After you have checked all of these items, if the drive is still incapable of reading discs that were burned from another computer, skip to Step 5. Under the Ltr column, find and remember the drive letter next to the CD/DVD drive that contains the disc. Autoplay When autoplay is enabled, a suggested video will automatically play next. Cd Drive Not Reading Disc Being a member gives you detailed monitoring of your requests.

In some cases, you may need to reinstall some programs such as CD or DVD burning software, iTunes, or Nero hope this helps Report t- Apr 5, 2015 11:17PM What if Dvd Drive Not Working Windows 10 Z7_M0I02JG0KONJ30ACBBF8MM1084 hp-hero-support-search Actions ${title} Loading... note: Cannot play movies.

Figure : Device Manager: DVD/CD-ROM drives If a name for a CD/DVD drive does not appear, or it is listed with errors, close Device Manager and use the HP support document

Wait until the computer fully shuts down, then disconnect the power cord from the computer. Cd Rom Not Working Windows 10 If the message "device is not ready" is shown, or the screen fails to update after 30 seconds, the disc or the drive may be bad. Repeat these steps using music CDs and DVDs (if your computer has a DVD drive). Verify that the latest version of the preloaded DVD player software (InterVideo WinDVD) has been properly installed and configured, including Region codes if applicable.

Dvd Drive Not Working Windows 10

Step 6: Using the Hardware and Devices troubleshooter Windows10 and 8 includes a troubleshooter that checks hardware, such as CD or DVD drives, for problems. http://support.hp.com/us-en/document/c03370738 Resetting the computer power can fix this problem. Cd Drive Not Working Windows 10 To reset the drive, follow these steps: Press and hold the power button for 5 seconds to turn your computer completely off. Cd Drive Not Working Windows 7 Select Boot Options, then press Enter.

If updates are available for the CD/DVD drive or recording software, select the ones that apply. A copy of the registry has saved for back-up purposes to the Documents folder. This condition cannot be changed within the System Configuration Utility and must be corrected. Step 5: Reinstalling the CD/DVD drive in Device Manager Use the following steps to remove and reinstall the drive name in Device Manager: Remove any discs that may be in the Cd Drive Not Working Windows 8

Most home electronics stores offer repair and cleaning kits for discs at minimal cost. The issue is not likely related to the drive or the disc. Sign in Statistics 459,947 views 941 Like this video? solvemyproblem 370,661 views 6:38 CD drive not detected: Windows 7 fix - Duration: 3:46.

If the drive is not recognized, continue to replace the PxHelp20 registry value. Cd Drive Not Showing The CD/DVD drive does not appear If a window does not open when discs are inserted into the drive and the drive does not display in File Explorer, then the drive If the DVD drive starts to work, then there is a problem with the PC’s power supply to the DVD drive.

If you have added a new drive, use the disc burning software that came with the drive or use the native burning capabilities of Windows.

Right-click CyberLink Power2Go, then click Uninstall. If other discs of the same type cannot be read, skip to Step 8 to test the drive to see if the drive has truly failed. Outright failures are somewhat rare, so if you are having trouble with your DVD drive hopefully it is a minor problem that can be resolved by following the above steps. Dvd Drive Not Detected Verify that the DVD movie playback is shown on the primary display.

Insert at least three more software discs in the same manner. Step 1: See if the drive appears in BIOS If a window does not open when discs are inserted into the drive and the drive does not appear in File Explorer, You may have to restart the computer. On the Boot Options sub-screen, select Boot Order, then press Enter.

Verify that the latest DVD player software is installed. If your notebook computer has a battery that is sealed within the computer's case, a battery that cannot be removed easily, skip this step. thank you so much. Step 4: Reading a disc from a command prompt If your computer cannot read discs, confirm that the drive can read discs from a command prompt.

To reset the BIOS, use one of the following sets of steps, depending on the type of computer you are using: To reset the BIOS on a notebook computer, press F9 Complementary Content Skip to Main Content Search Help Tips Dictionary History Forums Contact You are here: Help > Hardware Help > CD-ROM Help CD-ROM, DVD, or disc drive not working in All rights reserved Terms of Use | Privacy Policy | Site Map | Browser Compatibility UA-20013709-3 True 100 navigation menu Home Linkyopedia 3D Printing Blu-ray, CDs & DVDs Data Tape Flash Confirm the deletion by clicking Yes.

If Windows recognizes a problem with the DVD drive’s hardware or drivers, it will be noted here. Accidentally or improperly altering other BIOS settings will make matters worse. If Windows recognizes the CD/DVD drive, but the disc burning software does not detect the drive, refer to Software for burning discs does not recognize the drive.